View Memory - Bosch Fire System User Manual

VIEW MEMORY?

View Event Memory
Description
Event memory allows you or a service technician to review events after
they are cleared from the command center's display. Use this function to
view event memory.
Your system stores events that have occurred since the last time
[ANNUNCIATOR RESET] was pressed. Each time you press the
[ANNUNCIATOR RESET] key, the ALARM SILENCED message
clears from the display and the Event Memory is erased and new events
are recorded as they occur.
Using View Memory:
1. Press the [ESC] key to enter the menu, then press [NEXT]
repeatedly until you reach the VIEW MEMORY ? prompt.
Press [ENT].
2. Your system displays event summary lines and point text in this
order: fire alarm summary line, point text for each fire alarm
event; fire trouble summary line, point text for each fire trouble
event; trouble summary line, and point text for each trouble
event. Press [NEXT] to scroll through the events. If there are no
events to view, NO EVENTS displays.
3. Return to idle text at any time by pressing [ESC].
13