Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
PICTURE MENU (TV/Video mode) (continued)
Selected characters
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Contrast Mode
Back Light
Reset
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Color
Color Temp. Adjustment
Amplitude
Red
Green
Blue
Cut Off
Red
Green
Blue
36
Narrows the gap between
brightness and darkness.
Black is subdued for increased
overall darkness.
Decrease color intensity.
Soft
Enhances red and weakens green.
Darkens the screen.
(off the function)
Brighter scene is decreased in
reddish color.
Brighter scene is decreased in
greenish color.
Brighter scene is decreased in
bluish color.
Dark scene is decreased in reddish
color.
Dark scene is decreased in
greenish color.
Dark scene is decreased in bluish
color.
Broadens the gap between
brightness and darkness.
Black is set off for increased overall
brightness.
Increase color intensity.
Sharp
Enhances green and weakens red.
Brightens the screen.
(waiting to reset)
Brighter scene is increased in
reddish color.
Brighter scene is increased in
greenish color.
Brighter scene is increased in
bluish color.
Dark scene is increased in reddish
color.
Dark scene is increased in
greenish color.
Dark scene is increased in bluish
color.
Setup hint
Dynamic: This setting is best for very bright ambient lighting.
Natural: This setting is for normal lighting conditions.
Cinema: This setting is best for watching movie.
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
button at [+31]. The color for [+32] to [+40] numbers will change from
green to magenta. This special mode is better for dark scenes.
For normal viewing we recommend that the Contrast is set to [+31].
Adjust to preference.
Adjust to preference.
Shift to the minus (-) side for a softer effect and plus (+) for sharper
picture.
This is not available to adjust when receiving PAL/SECAM signal.
Then the character will be grayed out.
Adjust for the most realistic skin color.
Normally set to Cool.
Dynamic: Emphasizes the differences between video shadings to
improve the feeling of contrast.
Normal: The gradation of an image is reproduced as faithfully as
possible.
Auto: Detects image brightness and automatically adjusts for natural
brightness.
Adjust to preference (for the maximum visibility).
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
Performs picture signal noise reduction. Turn up to reduce noise.
Performs color signal noise reduction. Turn up to reduce noise. And it
will be fixed as Off only when selecting DVI-STB mode.
On: Automatically detects the movie film material and faithfully
reproduces the original film image.
Off: Set to OFF when switching between images does not appear
natural.
This is available only when receiving a PAL composite signal. Turn On
to reduce the discolorations in fine picture detail and provides purer
color.
Adjusts the sharpness of the picture signal.
Adjusts the sharpness of the color signal.
Adjusts the black level compensation.
This is available only when receiving an NTSC composite/S.Video
signal. This monitors and adjusts the color to maintain constant color
levels. It also maintains natural flesh tones while preserving fidelity of
background colors.
Turn On when you wish to change color temperature depending on the
user's preference.
Adjust color temperature depending on the user's preference. These
settings are independently stored in each of the 4 Color Temperature
modes.
SELECT
Advertisement
Table of Contents
