1. Select the [Start] menu
[Network Scanner Admin Tool].
The Admin Tool is started.
2. Specify the [Connect to] (of the scanner).
Enter the IP address, scanner name, or FQDN for the scanner to be setup or
managed.
ATTENTION
If the port number was changed in
enter the port number changed in [Port Number].
When trying to connect with a port number other than the specified number, it takes up
to 20 seconds before a connection error occurs.
To use SSL, select the [Use HTTPS] check box.
If the Admin Tool is started while there is insufficient free memory, a script error may
occur. Try again after ensuring that there is enough free memory.
3. Press the [Connect] button.
The [Login] window appears.
[All Programs]
"4.8.8 Setting the Admin Connection" (page
83
4.2 Administrator Login
[Network Scanner]
121),