LG 42LV3700 Owner's Manual page 38

I
38
ENTERTAINMENT
WPS (Wi:Fi Protecte<1 Setup)
• ..~ ~-T ': • • •
If your router or AP has a WPS button, it is the
easiest connection method. You simply press the
button on the router and then select the WPS on
the TV within 120 seconds.
1
Repeat step 1-7 on "Connecting to a wireless
network".
2
Press the Navigation buttons to select the
Simple setting (WPs-button mode).
3
Press the WPS button on your router.
4
Go back to the TV and select
Connect.
5
Repeat step 6-7 on "Connecting to a wired
network".
Ad-hoc Mode
Ad-hoc mode allows the TV to use a wireless to
connect to a computer without using a router or
access point.
1
Repeat step 1-5 on "Connecting to a wireless
network".
2
Press the Navigation buttons to select
Setting
Ad-hoc network
and press
ENTER.
3
Press the Navigation buttons to select
Enter
and press
ENTER.
4
Press
ENTER
to select
Connect
to connect Ad-
hoc network.
- You can see the Network ID and Security Key
on your TV screen.
- Enter this Network ID and Security Key to
your device.
- When needed, you can change the setting
information using the Red button.
o
NOTE
When searching for wireless networks on
your PC using ad-hoc, the TV is named
LGTV10.
• LGTV1 0 that appears in the list. (Select
the same name as the network ID that
appears on your TV screen.)
5
Press the Navigation buttons to type in an IP
address and press
ENTER.
Option Description
• Internet Protocol(TCP/IP) of
PC needs to be set manually.
IP address, Subnet Mask, and
default Gateway can be set with
PC
Setting
your own discretion.
»
e.g.) IP address:
192.168.0.1 / Subnet Mask:
255.255.255.0/ default
Gateway: 192.168.0.10
• Verify IP address and gateway of
PC. Input Gateway address of PC
to IP Address, and IP Address of
TV Setting
PC to Gateway, and select Enter.
»
e.g.) IP address:
192.168.0.10/ Subnet Mask:
255.255.255.0/ default
Gateway: 192.168.0.1
6
Press the Navigation buttons to select
Close
after Network setting is completed.
7
Press the
ENTER.