For Sun Servers - Samsung RKP1415 User Manual

RKP1415 / RKP1417 / RKP1419

For SUN Servers

●
●
●
●
●
●
●
●
●
●
Rev. : 1.0
11. Resolution Settings
Resolution configuration procedures should be run by qualified SUN
server administrator
Sun Servers are using resolution at 1152 x 900 x 76Hz.
Supported resolution mode for 15" LCD:
1024 x 768 x 70/75Hz
Supported resolution mode for 17" LCD:
1280 x 1024 x 75Hz
You need to change the Sun Server resolution before you connect to
LCD Display.
Please do the following procedures to change the resolution settings :
1. As root:
You may find the following comment "/user/sbin/m64config".
2. To view current resolution:
Type "/user/sbin/m64config – prconf".
3. To change to 1024x768 @ 70MHz:
Type "/user/sbin/m64config – res 1024x768x70 now".
4. The screen will be rubbish.
5. Then type "pkill Xsun".
And Type "pkill Xsession" to restart the Xsession.
Note : Remember to RESTART the server after these processes.
Under Common Desktop Environment (CDE).
To change the OpenBoot resolution, you can type the following
command in OK prompt.
1. In OK prompt, type "setenv output-device screen:r1024x768x70".
2. Type "printenv" to confirm the resolution has been changed
to 1024x768x70Hz.
3. Then type, "reset" to restart the system.
Note : Remember to RESTART the server after these processes
P.14
User Manual