Panasonic WJ-ND300 Setup Instructions page 51

Network disk recorder

Hide thumbs Also See for WJ-ND300:

Table of Contents

Perform the settings for command alarm [Command Alarm]

Set event actions at a command alarm occurrence for each camera channel.

Screenshot 1

Click the [Event] button in the setup menu (Advanced)

and then click "Command Alarm" to display the

"Command Alarm" window.

Step 1

Perform the settings for the following items for each

camera channel.

[REC CAM]

Performs the settings for a camera channel currently

used for recording.

[PRESET]

Select the preset position (--, 1-16) to which the camera

will move at an alarm occurrence.

When "--" is selected, the camera will not move to the

preset position.

[Output Terminal]

Select the output terminal (--, TRM1-TRM16) that out-

puts alarm signals at an alarm occurrence. When "--" is

selected, alarm signals will not be output.

Step 2

Click the [SET] button after completing the settings.

Table of Contents