Advertisement
REGULATED DC POWER SUPPLIES
Output voltage
Output voltage
Setting resolution
Maximum output voltage
Output current
Output current
Setting resolution
Maximum output current
Voltage regulation characteristics (at times other than during voltage remote sensing operation)
Line regulation (with respect to 10% variation in AC)
Load regulation (with respect to change from 0 to 100%) 5mV
Ripple/noise (10Hz to 1MHz)
Ripple peak (p-p)
Transient response
Temperature coefficient
Current regulation characteristics (at times other than during voltage remote sensing operation)
Line regulation (with respect to 10% variation in AC)
Load regulation (with respect to change from 0 to 100%) 20mA Typ
Ripple/noise (10Hz to 1MHz)
Ripple peak (p-p)
Temperature coefficient
Voltmeter
Display (3-1/2 digits, LED)
Accuracy (OUT ON)
Ammeter
Display (3 digits, LED)
Accuracy (OUT ON)
Functions
OUTPUT ON/OFF
OUTPUT PROTECT ON/OFF
PRESET (1, 2, 3)
MEMORY
KEY LOCK
EXT CONTROL ON/OFF
V/A
Output
Polarity
Terminal color
Groundable voltage limit
Voltage remote sensing
Power consumption VA/ W
Power requirement
Case dimensions
Maximum dimensions
Weight
Accessories
SPECIFICATIONS
0 to
18V
10mV
18V
0 to
5A
10mA
5A
2mV
0.5mVrms
5.6mVp-p
100 s Typ
100ppm/
Typ
4mA Typ
5mArms Typ
10mAp-p Typ
200ppm/
Typ
Maximum 19.99V display, fixed range, red LEDs
PAR18-5 :
(0.5%rdg 2digit) at 23
PAR36-3 :
(0.5%rdg 4digit) at 23
Maximum 9.99A display, fixed range, red LEDs
(1.0%rdg 2digit) at 23
5
Output on/off switch, but output cannot be switched on when MEMORY is on (red LED lights when on)
Cut off the output if voltage or current setting changed. (red LED lights when on)
3 sets of voltage and current values can be preset (green LED lights when on).
The setting contents of each preset can be checked.
Presetting of voltage and current values is possible (red LED lights when on).
All setting functions are fixed and all keys except POWER are locked (red LED lights when on).
On/off switch of EXT CONTROL terminal, current ; 100mA max
applied voltage ; 60V max, open collector, active low (red LED lights when on).
Voltage and current settings(green LED lights when on)
Positive or negative side groundable
,
S (red), ,
S (white), and GND (black)
250V DC
Possible, within 1.0V from output voltage
Approx. 264VA/213W
100V
10% AC, 50/60Hz, 120V/220V/240V
138 W
147 H
372 D mm
143 W
167 H
392 D mm
Approx.8.0kg
Instruction manual 1, Power cable 1, Modular cable 1
88
0 to
36V
36V
0 to
3A
3A
4mV
4.2mVp-p
3mA Typ
15mA Typ
4mA rms Typ
8mAp-p Typ
Maximum 39.99V display, fixed range, red LEDs
5
80%RH or less
5
80%RH or less
80%RH or less
10% (MAX 250V AC) internally switchable
Advertisement
