Panasonic KX-TD500 User Manual page 140

4.3 Station Features and Operation
• Floating Station
A floating station such as a DISA, MODEM or external pager cannot be programmed
as a forwarding destination.
• Two extensions can set each other as the destination extension. In this case, an intercom call
to the other party while he/she is absent will not be forwarded back to the original extension.
• Confirmation tone
Confirmation tone 2 (two beeps) is sent when the previously programmed data is same
as the new data. If it is not, confirmation tone 1 (one beep) is sent. Refer to the "Tone
List" in the Appendix (Section 6).
• You can call the original extension from the Call Forwarding destination extension.
• Both the Call Forwarding and Do Not Disturb (DND) functions can be programmed at
PT
the same time, but either one of them can be activated at a time.
You can enable or disable the Call Forwarding or Do Not Disturb (DND) function by
pressing the FWD/DND button while on-hook. If you set both Call Forwarding and
DND, alternating the mode is also available by pressing the FWD/DND button. In this
case, pressing the button changes the setting as follows:
The lighting patterns of the FWD/DND button are as follows:
Off : Both functions are canceled.
Red on : DND mode
Red flash : FWD mode
7250
• FWD/DND button
Regarding the PT (7050/7055/7250) without the FWD/DND button, it can be assigned
to a flexible (CO, DSS, PF) button by Station, User or System Programming.
• Distinctive Dial Tone
Distinctive Dial Tone is sent to the user on the extension with this feature when the
extension user goes off-hook.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — FWD/DND Button
• User Programming (Section 3)
[005] Flexible CO Button Assignment
• System Programming — Installation Manual, Section 4
4.2.2 System - Numbering Plan
4.2.7 System - System Option
4.4.2 Line - Extension Line
4.4.3 Line - DSS Console
Feature References
Call Forwarding — CANCEL
VPS Integration
DND FWD OFF
— (42) Call FWD - Do Not Disturb Set/Cancel
— (15) Special dial tone after setting feature
— (33) FWD/DND lamp pattern
— Flexible CO/PF Key Assignment
— Flexible DSS/PF Key Assignment
This setting can be changed by System
Programming.
Do Not Disturb (DND)
Station Features and Operation
C
4-25