Table of Contents
Advertisement
Note
To arm to Level 2 from Level
3, you must first disarm the
system and then rearm it.
6
No matter which level your system is in, all sensors programmed to be active 24 hours a day will
continue to report alarm conditions. This includes smoke detectors, fire sensors, panic buttons,
and environmental sensors.
Level 3—Doors, Windows, and Motions
All perimeter and interior sensors are active.
Note
Smoke detectors,
fire sensors, and
other environmen-
tal sensors con-
tinue to report
alarms in all levels.
Arming Level 1—Disarmed
Turn off intrusion/burglary protection for your system when security is not a concern. This would
be when you are home and will be going both inside and out.
Sensors that will remain active:
•
Environmental sensors (smoke, heat, carbon monoxide).
Sensors that will be inactive:
•
Indoor motion sensors.
•
Perimeter sensors such as doors and windows.
Here are some other situations in which you'd set the system to Level 1:
•
Upon entering your armed home or business. When entering the armed premises through a
designated delay door, the Entry Delay time begins. The siren beeps to remind you to disarm
the system.
•
Before opening a door or window in your home or business. When you wake up in the morn-
ing and want to get your newspaper, you must disarm the system before opening the door to
prevent an accidental alarm.
•
Disarming the system turns off any sirens when an alarm condition occurs.
To disarm to Level 1 using the panel keypad:
1. Press
once. The panel displays
2. Enter your access code. The panel displays the current time and the system sounds one beep.
To disarm to Level 1 using a keychain touchpad:
Press the
button.
To disarm to Level 1 using a wireless touchpad:
1. Press the
DISARM
button.
2. Enter your access code.
Arming Level 2—Doors and Windows
There are times when you want intrusion protection, but still want the freedom to move around
within your house without setting off an alarm. For example, in the evening when your family is
inside for the night. In this and similar situations, set your system to Level 2.
Level 2—Doors and Windows
Perimeter protection is on. Interior
sensors are not active so people and
pets can move around freely.
Level 1—Disarmed
Intrusion detection off. Smoke,
heat, and environmental sen-
sors remain active.
.
Enter Code TO DISARM
Advertisement
Table of Contents
