Hitachi HCX5000I User Manual page 33

S P
UGGESTED ROGRAMMABLE
Table 1-2 Suggested programmable keys (continued)
Key Name
<TONE>
<CALM>
1-22
K
EYS
Press the <TONE> key to cancel automatic hold, so that
you can operate equipment controlled by touch tones.
The lamp associated with the combined alarm key lights
when a malfunction is detected in the system, the answer
detection link, the PMS/PMSHOBIC link, or the VMS
link. The CALM lamp stays lit until the problem is
corrected.
The CALM lamp indicates the status of the alarms:
This lamp status...
Dark
Lit steadily
Slow wink/flash
Fast wink/flash
When you press the <CALM> key, alarm(s) that are
activated are shown in the LCD:
This display...
MJ/MN
ANSDET
PMS
VMS
The PMS alarm applies to WelCOMM systems only.
S
ELEC
Purpose
Indicates that...
no alarm conditions exist
one alarm has occurred
two or three alarms have occurred
all four alarms have occurred
Represents this alarm...
major/minor system alarm
answer detection link alarm
PMS/PMSHOBIC link alarm
VMS link alarm
HCXTD840, Issue 1, July 2001
S 500A U G
ET SER UIDE