DISASSeMBLy
3
2
L
POWeR SUPPLy ReMOvAL
Disconnect P203, P201, and AC In. Now
G
remove the 4 screws indicated.
4
0
MAIN BOARD ReMOvAL
Remove the Right side decorative plastic
piece by removing the top and bottom
screws. Remove the remaining 6 screws
and remove the shield covering the
Main board. Careful at this point, the
board will swing free of the supports.
Disconnect P902, P800, P901, P900,
P904, P401, and P500. Note: In the
top right is connector P200. This is an
open connection for software upgrades.
Remove the 2 screws securing the
Side input decorative plastic piece on
the right. Finally, remove the 4 screws
securing the Main board as indicated.
14
14
Fall 2008 LCD Training
Fall 2008 LCD Training