Page 1
Numéro de modèle : Serial No. : Numéro de série : POWER UNDER COLOR BLUE CHROMA CONTRAST VOLUME/SELECT MENU SCAN CHECK ASPECT SLOT BRIGHT PHASE INPUT SELECT TM-H1950CG (TM-H1950CG shown) (Gezeigtes Modell ist TM-H1950CG) (TM-H1950CG montré) (Modello TM-H1950CG) (Muestra de TM-H1950CG) LCT1025-002B-H...
Page 2
INSTRUCTIONS COLOR VIDEO MONITOR TM-H1950CG TM-H1750CG Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities.
CAUTION: Changes or modification not approved by precautions. JVC could void the user's authority to operate the WARNINGS equipment. To prevent fire or shock hazard, do not expose this NOTE: This equipment has been tested and found to monitor to rain or moisture.
POWER CONNECTION The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries.
SLOT PHASE BRIGHT INPUT SELECT TM-H1950CG (Front view of TM-H1950CG shown) Tally lamp Blue Check button [BLUE CHECK] Lights when the tally control signal is ON. The tally control Cuts red and green signal components. Only blue signal signal is input through the REMOTE (external control) components are shown.
VIDEO A VIDEO B AUDIO A AUDIO B AUDIO A (Rear view of TM-H1950CG shown) AUDIO B Video B (Y/C) terminals [VIDEO B Y/C IN/OUT] Y/C (S-video) signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected. (The input signal is automatically terminated if a cable is not connected to the OUT terminal.)
Page 7
50 Hz/60 Hz) AUDIO A AUDIO B For Europe (Rear view of TM-H1950CG shown) For the United Kingdom Main power switch Power cord Connects the provided power cord (120 V AC or Press the switch to turn the main power ON or OFF. When...
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG) Video input/output terminals Input (IN) and output (OUT) terminals for component (color deference) or RGB signals. G / Y The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) /B-Y Select component signal : press INPUT SELECT C button...
AC outlet. 2. Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card. Rear side of the TM-H1950CG color video monitor REMOTE...
ATTACHING THE POWER CORD HOLDER The provided Power Cord Holder prevents the AC power cord from being accidentally disconnected from the AC inlet. The Power Cord Holder consists of two parts; a case and cover. 1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws (provided).
HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION STATUS indication 1. Press the main power switch to turn on the power. (PAL or NTSC) 2. Press the POWER switch to turn on the power. ON : Power turns ON. (Power indicator: lit) POWER Green : The main power is ON, and the monitor’s power is ON (in the normal operation mode).
VIDEO SIGNAL CONTROLS Use these buttons for video signal control. UNDER SCAN Press the UNDER SCAN button to reduce the size of display area so that the whole picture is displayed on screen. Use to check the picture frame. COLOR OFF To display a black and white picture, press the COLOR OFF button to input the luminance signal only.
HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE <MENU> SCREEN MODE (SETTING) <MENU> screen You can set the following menu items. Set them depending on your needs. < MENU > APERTURE : 00 • APERTURE • COLOR SYSTEM ADJ.
Page 14
DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING) <SET-UP MENU> screen You can set the following set-up menu items. • PICTURE SUB ADJ. • WHITE BALANCE • REMOTE SYSTEM <SET-UP MENU> • H. POSITION • CONTROL LOCK • INPUT REMOTE PICTURE SUB ADJ.
Page 15
HOW TO USE THE MENU FUNCTIONS (cont’d) Set-up menu items Purpose Settings PICTURE SUB ADJ. Image sub adjustment Selects CONTRAST/BRIGHT/CHROMA/PHASE. The selected setting screen is shown. Select the function display for adjustment. – 10 – 9 – 01 + 01 + 09 + 10 •...
HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP MENU> RESET MODE You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and <SET-UP MENU> RESET screen the volume level to their factory-set (initial) values. <SET–UP MENU>...
BASIC CONNECTION EXAMPLE Notes: • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. •...
Page 18
VIDEO B (Y/C) Connection Example (Select Input B (Y/C)) VIDEO A VIDEO B Video Camera Y/C (S-video) (Y/C (S-video) signal cable) Video Monitor Y/C (S-video) (Y/C (S-video) signal cable) AUDIO A Video Monitor AUDIO B Audio Audio (Audio signal cable) (Audio signal cable) : Signal Flow...
HOW TO USE EXTERNAL CONTROL ABOUT EXTERNAL CONTROL This monitor is provided with an external control terminal. MAKE (make contact) or TRIG. (trigger) system can be selected by the setting of REMOTE SYSTEM in the <SET-UP MENU>. MAKE (make contact system) : The functino is controlled by short-circuiting or disconnecting each control terminal with pin 15 (GND).
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply.
SPECIFICATIONS MODEL TM-H1950CG TM-H1750CG Type Color video monitor Color system PAL, NTSC (3.58) Picture tube 49 cm (19") measured diagonally, 44 cm (17") measured diagonally, 90° deflection, in-line gun, 90° deflection, in-line gun, trio-dot type trio-dot type (phosphor dot-trio pitch 0.27 mm) (phosphor dot-trio pitch 0.27 mm)
Page 22
Dimensions [TM-H1950CG] Unit : mm (inch) < Side View > < Front View > 496 (19-5/8") 485 (19-1/9") 440 (17-3/8") (1/16") 375 (14-7/8") CHROMA CONTRAST VOLUME/SELECT MENU UNDER COLOR BLUE POWER SCAN CHECK ASPECT SLOT PHASE BRIGHT INPUT SELECT TM-H1950CG 380.4 (15")
Y/C (Mini DIN 4 pin) terminal specification Pin No. Signal GND (Y) GND (C) APPENDIX: CONNECTION EXAMPLES FOR THE SDI INPUT CARD ● To use the SWITCHED OUT terminal, the main power must be ON. (Unlike a bridged output, this connector outputs relocked digital signals.) ●...