Water Hardness; Display Brightness; Volume; Activating And Deactivating Mains Water Connection - Miele Built-in coffee machine Operating And Installation Instructions

Overriding the system lock
Whilst "Press for 5 seconds to unlock" is
showing in the display,
^ touch the lock symbol for 5 seconds.
As soon as you switch the coffee
machine off, the system lock will be
activated again and the coffee
machine is locked.

Water hardness

See "Using for the first time" for
information about water hardness.

Display brightness

You can set the display brightness in
the bar chart.

Volume

You can set the volume of the buzzer
and keypad tones in the bar chart.
Activating and deactivating
mains water connection
The coffee machine is designed to be
plumbed into the mains drinking water
supply. Water is automatically taken
into the water container when the
machine is set up for a plumbed
supply. If this option is switched off, the
water container has to be filled
manually.

Plate warmer

A warming drawer can be connected
directly to a socket at the rear of the
coffee machine using a special
connection cable (availabe as an
optional accessory). Miele or your Miele
dealer will be able to advise you on
which warming drawers are suitable.
The special connection cable required
is available to order from Miele or your
Miele dealer.
Once the warming drawer is
connected, you will need to activate it
in "Settings".
You can shoose from the following
options:
– Automatic: The warming drawer will
switch on and off together with the
coffee machine.
If you have programmed the "Switch
on at" timer, the warming drawer will
switch on approx. 30 minutes before
the coffee machine switches on in
order to pre-heat your cups.
– On: You can switch the warming
drawer on or off manually whenever
you want, independently of the
coffee machine.
– Off: The warming drawer cannot be
switched on because no electricity is
being supplied by the coffee
machine.
Settings
51