Hitachi 42V515 Operating Manual page 19

CONNECTING EXTERNAL VIDEO DEVICES
CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-P B P R .
1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV
set below.
2. Connect the cable from the C B /P B OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (P B) jack.
3. Connect the cable from the C R /P R OUT or R-Y OUT of the laserdisc/DVD player or HDTV set top box to the INPUT (P R ) jack.
4. Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.
5. Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.
6. Press the the INPUTS button, then select INPUT 2 from the INPUTS menu to view the program from the Laserdisc/DVD player
or HDTV set top box. The VIDEO OSD label disappears automatically after approximately four seconds.
7. Select Antenna from the INPUTS menu to return to the previous channel.
NOTES:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. See page 13 for tips on REAR PANEL CONNECTIONS.
ANT A
TO
CONVERTER
ANT B
INPUT 2 INPUT 1
Y/ Y/
VIDEO VIDEO
MONITOR OUT INPUT 4 INPUT 3
S-VIDEO
P P
B B
P P
R R
VIDEO
(MONO) (MONO) (MONO) (MONO)
L
TV AS CENTER
AUDIO
R
AUDIO
TO HI-FI
19
HDMI 1
RS232C
1 2 3 4 5
6 7 8 9
OUTPUT
P P Y
R L
R B
DVD Player