Hitachi 27AX4B, 27AX3B, 27AX0B Operating Manual page 24

-SET UP- FUNCTIONS (27AX4B, 27AX3B, 27AX0B)
Use the CURSOR UP or DOWN to highlight the function to change, press ENTER to
change the function, and press MENU to exit.
NOTE: The word MUTE will not be displayed if the DISPLAY is ON. If you do not have
sound, make sure MUTE is not set.
• INITIAL SETTING
Select -SET UP- and -INITIAL SETTINGS- when setting your TV up for the first time.
Use the CURSOR UP / DOWN or a NUMBER from the remote to highlight the functions
desired.
• AIR / CABLE
Select this function to change between regular VHF/UHF broadcasting (AIR) and cable
(CATV1 or CATV2).
Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU
to exit.
Reception channels for each mode are shown at the
right.
Refer to your cable or TV guide for channel identification standards.
If certain CATV channels are poor or not possible in the CATV mode, set the -