Using The Keyboard - Hitachi SH-G1000 User Manual

Using the Keyboard

The keyboard allows you to enter text. This section describes the basic
operations for entering text using the keyboard.
To enter characters (small letters) or codes printed on the keys in
black, simply press the corresponding keys.
To enter characters (capital letters) or codes printed on the keys in
black, press and hold the Shift key, and then press the corresponding
keys.
To switch Caps Lock on and off, press and hold the Shift key, and then
press the Fn (Caps) key.
To switch Num Lock on and off, press and hold the Shift key, and then
press the Num key.
Note:
With Caps Lock on, pressing a key with an alphabetic character
causes the corresponding capital letter to be entered. With Caps Lock
on, pressing a key with an alphabetic character while pressing the Shift
key causes the corresponding small letter to be entered.
To enter numeric characters and codes printed on the keys in purple,
press and hold the Num key, and then press the corresponding keys.
To enter A1 to A8 or
hold the Fn key, and then press the corresponding keys. When A1 to A8
are entered, the applications registered under these keys are started.
For the registration method, see "Setting Buttons" on page 94. For
, see "Adjusting the Screen Brightness" on page 44.
2A: Your PCS Phone – The Basics
printed in bluish green, press and
Section 2: Understanding Your Device
Keyboard
43