Panasonic Easa-Phone VA-30910 Operating Instruction page 2

Thank you for purchasing the Panasonic Easa-Phone VA-309/824, Key Telephone System.
*This system is equipped with the Hearing Aid device installed within the handset receiver.
*Each outside(CO/PBX) line can be individually programmed for either tone dialing or rotary pulse dialing.
*All the keys on this unit are the non-lock type.
Notification to your local telephone company
Before connecting or disconnecting telephone lines, call the telephone company and inform them of the
following:
I
COL1:
COL 5:
Telephone numbers
I COL2:
COL 6:
I
1 COL3:
COL 7:
I
I
I
I
) COL4:
I
COL 8:
I
Model number Panasonic VA-309/VA-824
FCC registration number for VA-309 KSU at factorv ACK8GR16979-KF-E
VA-309 KSU for modify ACK8GR19152-MF-E
FCC registration number for VA-824 KSU at factory
ACK8GR19274-K F-E
VA-824 KSU for modify I ACK8GR-19273-MF-E
I
Facility interface code
Service order code
Rinqer equivalence
02LS2
9.OF
0.4B
Required network interface jack
USOC RJl 1 W, RJl 1 C,
The FCC registration number will be found on the key service unit.
This unit must not be connected to a coin operated line.
If you are on a party line, check with your local telephone company.
Notice
TO
assure the safe use of your telephone, please observe the following guide lines for installation and use.
*This product is an electrical device and can be hazardous if immersed in water.
To avoid the risk of electrical shock, do not use this unit while in the bathtub, shower, or when wet.
If you accidentally drop the unit into water,_unplug it first, then retrieve it by pulling it by the cord.
*Do not use the telephone near sources of electric "noise" such as fluorescent lamps, air conditioner,
washing machine, TV sets or radios.
*The telephone should not be exposed to heat sources, direct sunlight, extreme temperatures, moisture,
strong vibrations, greasy of dusty environments.
*Never attempt to insert wires, pins, of similar objects in the vents or openings of the telephone.
*Never clean the telephone with benzene, paint thinner or other solvent materials.
Wipe with a soft cloth to clean.
*Do not change the unit installation location without consulting the dealer/installer.
.
i :
!. .i
pi
. .
' :
! . .
j
i .:.
1