6
2. Similarly, set the slide switch located inside the
battery compartment area of the Portable LCD
monitor to match the channel used by the camera.
3. Plug AC power adapter of the LCD monitor into
the power jack at the rear of the charging base. This
provides power to the Portable LDC monitor and
also charges the LCD monitor's battery.
4. Turn on the LCD monitor by pressing the POWER
button
on the front of the monitor. Adjust the
volume to the midpoint position.
5. Be sure to charge the Portable LCD Monitor for
at least 3 hours before removing from the charging
cradle in order to suffi ciently charge the battery.
Battery Standby time: up to 5hrs., continuous
operation up to 3 hrs.
Volume
Adjustment
Menu
Alarm
Sensitivity
Adjustment
Battery
Compartment
CHANNEL
SELECTION
Channel
Selection
Switch