ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR...
Contents Your Phone ................1 Keys and Functions ............... 2 Screen Icons ................. 4 Installing the SIM Card and the Battery ......... 5 Removing the Battery and the SIM Card ........ 5 Charging the Battery ............6 ...
Features marked with “Optional” are optional and may vary with phone models. Your Phone The following figure shows the appearance of your phone. Earpiece Flashlight Screen # key Left soft key Number keys Navigation keys End/Power key Call/Answer key Right soft key * key Charger jack...
Keys and Functions Press… To… Make a call. Answer a call. View Dialed calls in standby mode. Power the phone on or off (press and hold the key for about 3 seconds). End or reject a call. ...
Page 6
Press… To… Turn the Flashlight on (press and hold about 3 seconds or press twice in standby mode). Turn the Flashlight off (press Access Alarm clock (press ) in standby mode. Access Call Records (press ) in standby mode. ...
Press… To… Enter * (press the key) or P (press and hold the key) in standby mode. Display the symbol list in editing mode. Enter #. Lock the keypad in standby mode (press and hold the key for about 3 seconds). Switch between text input methods in editing ...
Mute profile activated. Customize profile activated. Frequency modulation (FM) radio turned on. Missed calls. Installing the SIM Card and the Battery Before installing the subscriber identity module (SIM) card, ensure that your phone is powered off. When installing the SIM card, ensure that the gold contact area faces down, and that the beveled edge of the SIM card aligns with that of the SIM card slot.
If your phone does not work properly or if crashes occur, press the battery reset button on the right of the SIM card slot, and then press and hold for about 3 seconds until the phone is powered on again. Charging the Battery Connect the small end of the universal serial bus (USB) cable to the phone's charger jack and the larger end to the charger.
Making a Call In standby mode, enter the phone number. To make an international call, press and hold to enter the plus sign (+). Then enter the country or region code, area code, and phone number. To call an extension number, enter the phone number, press and ...
you must enter the phone unlock code each time you power on the phone. The preset phone unlock code is 0000. You can change this code into any numeric string between four and eight digits. If you forget the phone unlock code, contact your service provider. PIN and PUK The personal identification number (PIN) protects your SIM card from unauthorized use.
Indicator Text Input Mode ABC, Abc, and abc Multi-tap input modes Predictive input mode Number input mode Press (Delete) once to delete the last character entered or press and hold (Delete) for about 3 seconds to delete all the characters. Entering a Word To enter a word in multi-tap input mode, repeatedly press the ...
In multi-tap and predictive input modes, repeatedly press to enter commonly used symbols. In multi-tap input mode, press once to enter a space and twice to enter 0. In predictive input mode, press to switch between upper case and lower case, and press to enter a space.
You can also turn the flashlight on by pressing and holding the up navigation key for about 3 seconds or by pressing the up navigation key twice. You can also turn the flashlight off by pressing the up navigation key once. FM Radio (Optional) Your phone comes with a built-in antenna.
frequency, changing the Radio Data System (RDS), and turning the FM radio off. Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the device safely. Read this information carefully before using your device.
using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
The device complies with the RF specifications when the device is used near your ear or at a distance of 1.5 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1.5 cm away from your body to meet the requirement earlier mentioned.
model may invalidate any approval or warranty applicable to the device, result in the non-operation of the device, and cause danger. Battery and Charger Unplug the charger from the electrical plug and the device when not in use. The battery can be charged and discharged hundreds of times ...
Danger of explosion if battery is incorrectly replaced. Recycle or dispose of used batteries according to the local regulations or reference instruction supplied with your device. Cleaning and Maintenance The device, battery, and charger are not water-resistant. Keep them dry.
0.758W/kg, and when properly worn on the body is 0.628 W/kg. EU Regulatory Conformance Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Page 21
For the declaration of conformity, visit the Web site www.huaweidevice.com/certification. Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU) Version: 01 NO.: 6010664...