Preview Area - Canon imagePROGRAF iPF6400S User Manual

iPF6400S

Preview Area

Preview Area

You can check the settings you made on the image in this area.
Preview
•
Select the preview display method.
For more information about preview, see "Utilize Three Types of Previews."
Setting
Print Area Layout
Image
Roll Paper Preview
Print Selected Range
•
Place a checkmark here to only print the selected range.
• When you select Preview in the Image, then select a portion of the image on the preview display, this becomes valid.
Note
Perform Proof in Preview
•
Place a checkmark here to simulate the colors of the output product in the preview.
• If Auto (Color) is selected under Output Profile, some media types are enabled.
• If ICC profile is selected under Output Profile, this is always enabled.
Note
• The actual color balance of the print product and the simulation product may differ with some environments and condi-
tions. In addition, when you have selected an ICC Profile with Output Profile and it is not compatible with the printer or
media that you are using, the color balance of the actual print product will differ.
Image Properties button
•
User's Guide
Displays the print range and the area out of the print range in the layout matching the Paper Size
set.
*You can change the image print position when you drag the image while the cursor is displayed
as .
The entire image is displayed.
*You can select the print range when you drag the image while the cursor is displayed as
*When you click the image while the cursor is displayed as
Display the media size and roll paper information on the top in the layout printing on roll paper.
*To select Roll Paper Preview, select Roll Paper in Paper Source.
P.269
➔
Details
, the selected area is deselected.
Preview Area
.
249