Using The Output Stacker - Canon imagePROGRAF iPF6400 User Manual

Using the Output Stacker

Using the Output Stacker Using the Output Stacker
This topic describes how to use the Output Stacker.
Use the Output Stacker in position (1) when storing printed documents.
When the Output Stacker is not used, fold the stacker to stow it in position (2).
•
The Output Stacker can hold paper up to 36 inches (914.4 mm) long.
•
Important The number of sheets that can fit in the Output Stacker is one sheet. When printing multiple pages, remove each sheet after
it is printed.
•
Before printing banners or other long documents, tap the Output Stacker. We recommend that you spread a clean cloth or
paper on the floor and select Eject as the cutting method for rolls to prevent the printed surface from becoming dirty or
scratched. (See "Specifying the Cutting Method for Rolls.")
564
Use the Output Stacker in the regular position (a).
The stacker may also be used in the extended position (b) for some types of paper. To switch to the extended position,
move the Support Rod to position (b). The extended position enables easy removal after printing.
→P.544
iPF6400
User's Guide