Toshiba PERCEPTION 4000 User Manual page 34

PERCEPTION 4000
2. Enter the Do Not Disturb
access code.
3. Press the hookswitch to return
to any held caller.
To Register Do Not Disturb from
an Idle State:
1. Take your telephone off-hook.
2. Enter the Do Not Disturb
access code.
To Cancel Do Not Disturb:
1. Press the hookswitch to place
any current caller on "soft
hold."
. . . or . . .
Go off-hook.
2. Enter the Do Not Disturb
Cancellation access code.
2-22
Listen for success tone.
Listen for dial tone.
Listen for success tone.
When placing a caller on "soft hold," listen for recall dial tone.
Listen for success tone.
NOTES:
1. If your telephone has Do Not Disturb registered, calls to your
telephone will appear at multi-line telephones that have your station
as a line appearance. These calls will ring and/or display, based on
the configuration and state of the telephones.
2. If your station has Do Not Disturb registered and also has Call
Forward—All Calls or Call Forward—Busy/No Answer activated,
incoming calls will be forwarded to the assigned destination. Since
Do Not Disturb activation creates a busy condition, Call Forward—No
Answer will not route calls to a Do Not Disturb station's Call Forward
destination.
3. You cannot camp-on to a station that has Do Not Disturb registered.
Only attendants can override the Do Not Disturb condition and camp
calls onto these stations.
4. When Do Not Disturb is registered, Camp-on callbacks, Call Hold
recalls, and Call Park recalls will still ring at the station.
5. Calls will not be forwarded to a station that has Do Not Disturb
registered. Instead, the calls will either ring the called station or will
forward to the Do Not Disturb station's Call Forward destination.
FEATURE OPERATION