Access Codes 109; Troubleshooting; If Your Device Stops Responding; Restore Original Settings - Nokia N8–00 User Giude

Update your device software.
•
If your issue remains unsolved, contact Nokia for repair options. Go to
www.nokia.com.hk/repair. Before sending your device for repair, always back up the
data in your device.
Access codes
PIN code — This code protects your SIM card against unauthorised use. The PIN code (4
- 8 digits) is usually supplied with the SIM card.
PIN2 code — This code (4 - 8 digits) is supplied with some SIM cards, and is required to
access some functions in your device.
If you forget an access code, contact the network service provider whose SIM card is in
your device. After three consecutive incorrect PIN or PIN2 code entries, the code is
blocked, and you need the PUK code to unblock it.
PUK code and PUK2 code — These codes (8 digits) are required to change a blocked PIN
code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact
the network service provider whose SIM card is in your device.
IMEI number — This number (15 or 17 digits) is used to identify valid devices in the GSM
network. To view the IMEI number for your device, in the home screen, enter *#06#.
Lock code (also known as security code) — The lock code helps you to protect your device
against unauthorised use. You can create and change the code, and set the device to
request the code. Keep the new code secret and in a safe place separate from your
device. If you forget the code and your device is locked, your device will require service.
Additional charges may apply, and all the personal data in your device may be deleted.
For more information, contact a Nokia Care Centre or your device dealer.

Troubleshooting

If your device stops responding

Reboot your device. Press and hold
times and switches off. To switch your device on again, press
No content, such as contacts or messages, is deleted.

Restore original settings

If your device is not working properly, you can reset some settings to their original
values.
1 End all active calls and connections.
for about 8 seconds. The device vibrates three

Access codes 109

.