P2Baud; Pfilter; Locke; Position Filter Enable - Motorola M12 Oncore User Manual

RTCM Port Mode

p2baud

Position Filter Enable

pfilter

Position Lock Enable

locke

Motorola GPS Products
M12 Oncore User' s Guide Supplement
Revision 1.0 01/25/00
COMMAND DESCRIPTIONS
Function Sets the baud rate of the RTCM input port.
Syntax p2baud ([2 | 4 | 9 ])
Example p2baud 4<ENTER>
Notes RTCM corrections can be input directly on the second comm port
of the receiver on pin 5. The baud rate of this port is independent
of the status of the primary serial port.
See Also None
Binary Equivalent @@AO
Function Enables or disables the position filter
Syntax pfilter ([ 0 | 1 ])
0
1
Example pfilter 0<ENTER>
Notes None
See Also None
Binary Equivalent @@AQ
Function Enables or disables the position lock feature.
Syntax locke ([ 0 | 1 ])
0
1
Example locke 1<ENTER>
Notes None
See Also None
Binary Equivalent @@AS
2 = 2400
4 = 4800
9 = 9600
= disabled
= enabled
= disabled
= enabled
115