Page 3
• After having installed the appliance, check that it is not tumble dry items which have been washed in water or standing on the inlet and drain hose and the worktop is require airing. not pressing the electrical supply cable against the •...
Product description Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash programme.
Control panel On the following page there is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lights and the display. These are presented by relevant numbers on the following pages. Programme selector dial Extra rinse button Spin button...
Page 6
Available options: The display shows the following information: 10.1: Child safety lock Super Quick This device permits you to leave the appliance unattended Short cycle for lightly soiled items or for laundry which during it's functioning. needs only freshening up. We recommend you to reduce 10.2: the fabrics loading.
Washing Programmes Programme - Maximum and Minimum Temperature - Cycle De- Detergent Compart- scription - Maximum Spin Speed - Maximum Fabrics Load - Options ment Type of Laundry Cottons SPIN 90° - 60° RINSE HOLD Main wash - Rinses SUPER QUICK Maximum spin speed at 1400 rpm EXTRA RINSE Max.
Page 8
Programme - Maximum and Minimum Temperature - Cycle De- Detergent Compart- scription - Maximum Spin Speed - Maximum Fabrics Load - Options ment Type of Laundry Easy iron SPIN 40° RINSE HOLD Main wash - Rinses EXTRA RINSE Maximum spin speed at 900 rpm Max.
Programme - Maximum and Minimum Temperature - Cycle De- Detergent Compart- scription - Maximum Spin Speed - Maximum Fabrics Load - Options ment Type of Laundry Rinses SPIN Maximum spin speed at 1400 rpm RINSE HOLD Max. load 7 kg EXTRA RINSE With this programme it is possible to rinse and spin cotton gar- ments which have been washed by hand.
Timed Drying Programmes Suggested dry- Degree of Drying Type of Fabric Drying Load Spin Speed ing time in Mi- nutes 175-195 5 kg STORE DRY Cotton and linen (bath- 90-100 3,5 kg 1400 Suitable for items to put away with- robes, bath towels, etc) 40-50 1,5 kg...
Tar stains: first treat with stain remover, methylated spirits Your appliance incorporates a recirculation system which or benzine, then rub with detergent paste. allows an optimal use of the concentrated detergent. Follow the product manufacturer’s recommendations on Detergents and additives quantities to use and do not exceed the «MAX»...
Follow the product manufacturer’s recommendations on • dryness degree required (iron dry, store dry) quantities to use and do not exceed the «MAX» mark in • type of laundry the detergent dispenser drawer. • weight of the load size . Garment labels The average drying time for a timed drying are indicated in the «Drying programmes»...
Daily Use Load the laundry Turn the selector dial to position to reset the pro- gramme/to switch the machine OFF. Open the door by carefully At the end of the programme the selector dial must be pulling the door handle turned to position , to switch the machine off.
Page 14
Select the Delay Start by pressing button 8 Interrupting a programme Before you start the programme, if you wish to delay the Press the button 7 to interrupt a programme which is run- start, press this button to select the desired delay. ning, the corresponding pilot light starts blinking.
Use - Drying locked and the display keeps showing the flashing zero « ». Drying only Note! The recommended load size is 3,5 kg for cottons and lin- If you wish to open the door before or during the an- en, and 2 kg for synthetic items.
door is locked and the display keeps showing the Turn the selector dial to the position to switch flashing zero « ». (If you wish to open the door the machine off. before or during the anti-crease phase, please follow Remove the laundry.
Page 17
Replace the drawer and run the rinse programme with- out any clothes in the drum. Cleaning the pump The pump should be inspected regularly and particularly • the appliance does not empty and/or spin; • the appliance makes an unusual noise during draining When the container is full of water, put the drainage due to objects such as safety pins, coins etc.
Page 18
• Turn off the water tap. • Unscrew the hose from the tap. • Clean the filter in the hose with a stiff brush. Clean the filter under the water tap and put it back in the • Screw the hose back onto the tap. Make sure the pump into the special guides.
when the drain pump is empty, install the water inlet place a container on the floor below the recess of the hose again. drain pump; press the two levers and pull forward the drainage Warning! duct to let the water flow out; Make sure that the temperature is more than 0 °C before when the container is full of water, put the drainage you use the appliance again.
Page 20
Problem Possible cause/Solution The water tap is closed. • Open the water tap. The inlet hose is squashed or kinked. • Check the inlet hose connection. The machine does not fill: The filter in the inlet hose or in the inlet valve filter are blocked. •...
Page 21
Problem Possible cause/Solution The programme is still running. • Wait the end of washing cycle. The door lock has not been released. The door will not open: • Wait until the door is released. There is water in the drum. •...
Problem Possible cause/Solution The machine does not dry or does The drying time or the dryness degree has not been selected. not dry properly: • Select the drying time or the dryness degree. The water tap is not turned on. •...
Water Supply Pressure Minimum 0,05 MPa Maximum 0,8 MPa Maximum Load Cotton 7 kg Maximum Dry Load Cotton 3,5 Kg Cotton Big Capacity 5 Kg Synthetic 2 Kg Spin Speed Maximum 1200 rpm Consumption values Programme Energy consumption Water consumption (litres) Programme duration (Mi- (KWh) nutes)
Page 24
Installation on suspended flooring Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a wa- terproof wood panel, at least 15 mm thick under the appli- ance, secured to at least 2 floor beams with screws, the wood panel must extend beyond the front feet.
Page 25
The other end of the inlet hose which connects to the Place the drain hose into your standpipe, which should appliance can be turned as showed in the picture. have an internal diameter of approximately 38 mm thus Do not place the inlet hose downwards. Angle the hose ensuring there is an air break between the drain hose to the left or right depending on the position of your and standpipe.
If the outlet spigot has not Push the drain hose onto been used before, remove the spigot and secure with any blanking plug that a clip, ensure a loop is may be in place. formed in the drain hose SHOWER SINK TOILET (see above) to prevent BATH...
Environmental concerns >PP<=polypropylene The symbol on the product or on its packaging This means that they can be recycled by disposing of indicates that this product may not be treated as them properly in appropriate collection containers. household waste. Instead it should be taken to the Ecological hints appropriate collection point for the recycling of electrical To save water, energy and to help protect the environment,...