Chapter 5 Setup
5.1 Basic Setup
2-1
Specify the required items and click the [Next>>] button.
A confirmation screen appears.
2-2
Click the [OK] button.
The name of the ETERNUS DX Disk storage system is set and the setting completion screen appears.
2-3
Click the [Done] button.
The [Set Date and Time] screen appears.
3
Set date and time.
Set the time, date and time zone of the internal clock in the ETERNUS DX Disk storage system.
To use the NTP function, set up the NTP function after the initial setup is complete.
3-1
Specify the required items and click the [Next>>] button.
A confirmation screen appears.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
94
Copyright 2013 FUJITSU LIMITED
P3AM-4832-07ENZ0