Rear Panel - Yamaha RX-A1020 Owner's Manual

Rear panel

1 2 3 4 5 6
DC OUT NETWORK
5V 0.5A ( 3 NET )
PHONO AV 1 AV 2 AV 3 AV 4
AV OUT
(1 BD/DVD)
GND
L
R
1 COAXIAL 2 COAXIAL 3 OPTICAL 4 OPTICAL
ANTENNA
HD Radio (4 RADIO)
FM AM
75Ω
E
1
PHONO jacks
For connecting to a turntable (p.33).
2
DC OUT jack
For connecting to an optional accessory.
3
NETWORK jack
For connecting to a network (p.35).
4
AV 1–4 jacks
For connecting to video/audio playback devices and
inputting video/audio signals (p.31).
5
AV OUT jacks
For outputting video/audio to a recording device (such as a
VCR) (p.36).
6
MONITOR OUT/ZONE OUT
(composite video/S-video) jacks
For connecting to a TV that supports composite video or
S-video and outputting video signals (p.29) or for connecting
to a Zone2 video monitor (p.79).
7
HDMI OUT 1–2 jacks
For connecting to HDMI-compatible TVs and outputting
video/audio signals (p.25). When using ARC, TV audio signal
can also be input through the HDMI OUT 1 jack.
7 8 9 0
HDMI
HDMI OUT
1 2 AV 1 AV 2 AV 3 AV 4
ARC (1 BD/DVD)
COMPONENT VIDEO
MONITOR OUT/
Y P P Y AV 3 P C P
B R B R
ZONE OUT
AV 1
A MONITOR OUT/ZONE OUT
Y P
B
AV 2
B
D
AV 4
AUDIO 1 AUDIO 2 AUDIO 3 AUDIO 4 MULTI CH INPUT
ZONE OUT
(2 TV) CENTER
FRONT SURROUND SUR. BACK SUBWOOFER ZONE 2 FRONT
5 OPTICAL 6 COAXIAL
SPEAKERS
SURROUND SURROUND BACK
R L R
F G H
8
COMPONENT VIDEO (AV 1–4) jacks
For connecting to video playback devices that support
component video and inputting video signals (p.31).
9
HDMI (AV 1–7) jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.31).
0
MONITOR OUT/ZONE OUT
(component video) jacks
For connecting to a TV that supports component video and
outputting video signals (p.29) or for connecting to a Zone2
video monitor (p.79).
A
REMOTE IN/OUT jacks
For connecting to a Yamaha product that supports SCENE
link playback (p.37) or for connecting to an infrared signal
receiver/emitter that allows you to operate the unit and other
devices from another room (p.80).
B
TRIGGER OUT 1–2 jacks
For connecting to devices that support the trigger function
(p.37).
C
RS-232C terminal
This is a control expansion terminal for custom installation.
Consult your dealer for details.
A B C D
RS-232C
AV 5 AV 6 AV 7
TRIGGER
OUT
1
REMOTE
P
R IN OUT
2
12V 0.1A
PRE OUT
(SINGLE)
1
2
SURROUND SUR. BACK SUBWOOFER CENTER
AC IN
CENTER FRONT ZONE 2/F.PRESENCE/
L R L R L
BI–AMP
EXTRA SP
SINGLE
I J
(U.S.A. model)
* The area around the video/audio output jacks is
marked in white on the actual product to
K
prevent improper connections.
D
VOLTAGE SELECTOR
(General model only)
Selects the switch position according to your local voltage
(p.38).
E
ANTENNA jacks
For connecting to FM and AM antennas (p.34).
F
AUDIO 1–4 jacks
For connecting to audio playback devices and inputting
audio signals (p.33).
G
MULTI CH INPUT jacks
For connecting to a device that supports multi-channel
output and inputting audio signals (p.36).
H
ZONE OUT jacks
For connecting to the external amplifier used in Zone2 and
for outputting audio (p.79).
I
PRE OUT jacks
For connecting to a subwoofer with built-in amplifier (p.17) or
to an external power amplifier (p.23).
J
SPEAKERS terminals
For connecting to speakers (p.14).
K
AC IN jack
For connecting the supplied power cable (p.38).
FEATURES ➤ Part names and functions
11
En