Scan Encrypted Channels; Channel List; Receiver Upgrade - Oad; Parental Locking - Sharp TU-R252H Operation Manual

6.2.7. CHANNEL LIST

Use "5/6" to go to Channel List option. Use "3/4" to toggle Channel List Mode. If you select "TV
Only" you navigate through only TV channels, if you select "Radio Only" you navigate through only
radio channels, if you navigate "Text Only" you navigate through only Text channels using PR+ / PR-
on the remote control. If you choose "Show All" all, channels can be navigated using PR+ / PR- on the
remote control. To save the recent changes and exit, press MENU on the remote control.

6.2.8. SCAN ENCRYPTED CHANNELS

Use "▲ / ▼" to go to the Scan Encrypted Channels option. Use "◄ / ►" to toggle YES or NO the
searching for encrypted channels.

6.2.9. RECEIVER UPGRADE - OAD

Over Air Download (OAD): To ensure
that your DTR always has the most up to
date information. Please ensure that after
use it is set to its standby mode. The DTR
automatically powers up at 3.00 A.M. each
day and searches for any new information
which may be broadcast and will download
this to your DTR automatically. This
operation will normally take approximately
30 minutes. If you have an important
recording to make at 3.00 A.M. which must
not have a 30 minutes interrupt then you
can disable the auto OAD search by
performing the following:
Ø Press Menu and using "5/6" on the remote control to choose Setup and press OK.
Ø Highlight Configuration menu using "5/6" and pres OK on the remote control.
Ø Use "5/6" to choose "RECEIVER UPGRADE" and press OK on the remote control.
Ø Using "3/4" on the remote control to change "Automatic scanning"
Disabled.
Ø Highlight "Scan for upgrade" menu using "5/6" and press OK on the remote control to
commence upgrade.
Do not forget to re-enable the automatic OAD function after you have made your recording by
repeating the above instructions but this time selecting ENABLE.

6.2.10. PARENTAL LOCKING

Use "5/6" on the remote control to go to Parental
Lock option. Press OK on the remote control to enter
the menu. A box asking for the PIN code is
displayed. This pop-up is set to "0000" initially. Enter
the PIN code. If it is incorrect, "Wrong Pin" is
displayed. If it is correct, the Parental Control Menu
is displayed.

6.2.10.i. MENU LOCK

In menu lock you can set locking for All Menus, or the Installation Menu to restrict access to these
menu's. If the menu lock is disabled, there will be free access to the menu system. Use "5/6" on the
remote control to go to Menu Lock option. Use "3/4" on the remote control to choose Menu Lock
Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with the correct lock button.So the user can't add,
delete, rename, channels, can't set timers.
INSTALLATION MENU : Installation menu is locked.So the user can't add channels. Changes will be
updated after exiting 'Configuration Menu'.
27
from Enabled to