▀ HNB GW Service Configuration
Notes:
<
<
between HNB-GW and HNB.
Verifying HNB-GW Configuration
This section shows the configuration parameters configured for HNB-GW service.
Step 1
Verify that your HNB-GW services were created and configured properly by entering the following command in Exec
Mode:
▄ Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide
> is name of the source context in which HNB-GW service is configured.
> is name of the HNB-GW service which is to be configured for used for Iuh reference
HNB-GW Service Configuration Procedures
OL-22991-01