Use; Control Panel - Zanussi W1202 Instruction Booklet

Use

Control panel

1 Detergent dispenser drawer and
programme chart
2
Drying time selector dial
Graduated up to 120 mins for cottons (black
section) and synthetics (grey section), this dial
allows you to select the desired drying time
according to the type and quantity of laundry and
the required degree of dryness.
Turn the dial clockwise only.
Cooling phase
To allow the laundry to cool down, a cooling phase
starts automatically 10 minutes before the end of
drying and this phase must in no circumstances be
reduced or interrupted.
3 Drying indicator light
This light illuminates when the machine is drying.
4 Mains-on light
This light illuminates when the machine starts
working and goes out when the ON/OFF button is
Prewash
released.
Main wash
5 On/Off button
Fabric softener,
starch
By depressing this button the machine starts
operating.
When depressed again, the machine stops.
6 Half load button
Select this button to reduce water consumption on the
rinse cycle when washing a half load of cottons or
linens.
7 Temperature selector dial
Turn this dial clockwise or anti-clockwise to select
the required temperature.
Position
cold water.
8 Programme selector dial
Turn the dial clockwise to select the required wash
and drying programme.
Before setting the dial to any position the machine
must be switched off by depressing the ON/OFF
button again.
26
means that the machine will wash with