Engine Preparation - Yamaha G11A Owner's/Operator's Manual

ENGINE PREPARATION

With the key removed and the spark
plug lead disconnected, turn the
clutch by hand until compression is
felt. This puts the valves in the closed
position.
CHASSIS
PREPARATION
1. Increase the tire pressure to 23 psi
(160 kPa, 1.6 kgf/cm 2 ).
2. Clean exterior of the utility car and
apply a rust inhibitor.
3. Cover the utility car with a breath-
able cover and store it in a dry,
well-ventilated area.
UTILITY
STORAGE
BATTERY
PREPARATION
1. Remove the battery from the utility
car and store it in a cool, dry place
that stays between 32˚F (0˚C) and
90˚F (30˚C).
2. Have the battery recharged every
60-90 days to keep it fully
charged. The battery must be kept
fully charged to avoid damage.
:
NOTE
Batteries like the one supplied with
your car normally do not require you to
check the water level inside the bat-
tery for the one year warranty
period provided by the manufacturer.
1
2
3
4
5
6
7
8
9
10
11
9-2