Engine Oil - Yamaha G20A Owner's/Operator's Manual

MIN
C
A
Recommended oil:
YAMALUBE 4-cycle oil or
SAE 10W-30
Engine oil capacity:
1.16 US qt
(1.1 L, 0.24 Imp gal)
Oil change quantity:
1.0 US qt
(0.9 L, 0.19 Imp gal)
MULTI-PASSENGER
PRE-OPERATION CHECKS
Y-514
B
MAX
A
Y-28
Y-515

ENGINE OIL

With the vehicle parked on level
ground, remove the dipstick and make
sure the engine oil is between the MIN
and MAX marks (the crosshatched
area on the end of the dipstick).
å Oil level dipstick
∫ Maximum oil level
ç Safe operating range
If the oil level is below the MIN mark
on the dipstick, add oil through the oil
filler hole until the oil level is between
the MIN and MAX marks. Do not add
oil if the level is above the MIN mark.
å Oil filler hole
CAUTION
Use care not to fill past the MAX
G
dipstick mark, and be sure no for-
eign material enters the crank-
case.
Use care not to get oil on the
G
starter belt.
:
NOTE
The distance between the dipstick
marks represents approx. 1/2 US qt
(1/2 L) of oil.
:
NOTE
Recommended engine oil classifica-
tion: API Service SE, SF, or SG.
Engine oils labeled "Energy Conserv-
ing II" are recommended.
6
6-3