Yamaha BREEZE YFA1R Owner's Manual page 121

4. After adjusting, be sure to tighten the lock-
nut and the axle holding bolts.
Tightening torque:
Locknut:
15.5 Nm (1.55 m0kgf, 11.2 ft0lbf)
Axle holding bolts (upper):
85 Nm (8.5 m0kgf, 61 ft0lbf)
Axle holding bolts (lower):
60 Nm (6.0 m0kgf, 43 ft0lbf)
5. Finger tighten the hub stopper bolt and tight-
en the hub stopper bolt locknut.
Tightening torque:
Locknut:
15.5 Nm (1.55 m0kgf, 11.2 ft0lbf)
cC
If measurement
ing bolt is less than 27 mm (1.06 in), ask a
Yamaha dealer to replace the drive chain.
A
A. 27 mm (1.06 in)
8-26
A A of the drive chain adjust-