Installation Precautions
•
Install CDR400tx on a level surface.
•
Do not install CDR400tx near water, in direct sunlight,
close to heating units, or in areas subject to high or low
temperature extremes, excessive dust, vibration, or severe
shocks.
•
Do not expose CDR400tx to extremes of humidity.
•
The ambient temperature where CDR400tx is installed
should be between 5 C and 40 C (41 F–104 F).
•
Using CDR400tx close to a television or radio may cause
interference. Install CDR400tx at least one meter away
from television and radio equipment.
•
Do not block the CDR400tx ventilation slots. Install
CDR400tx with at least 10 cm of free space all-around.
•
Make sure the CDR400tx power cord is not located in a
position where it is likely to be walked on or pinched by
other equipment.
Important Precautions
ii