Chapter 4 - Operation
Ejecting the Disc
If the CDR400Atx is powered on:
Press the eject button to eject the disc.
Note: You cannot eject the disc if the SCSI command prohibits the eject
operation while the CDR400Atx is reading data.
Caution: Be sure to remove the disc after it is completely ejected. (Trying to
remove the disc before it is completely ejected may cause the drive to
malfunction.)
PO W ER
Press the eject button
tx
C D R 40 0A
If the CDR400Atx is not powered on:
Pressing the eject button will not eject the disc.
11