Wheel Removal; Wheel Installation - Yamaha BLASTER YFS200S Owner's Manual

EBU01112

Wheel removal

1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
Front
Rear
EBU01300

Wheel installation

1. Install the wheel and the nuts.
2. Lower the ATV to the ground.
3. Tighten the wheel nuts to the specified
torque.
Tightening torque:
Front wheel nut:
45 Nm (4.5 m0kgf, 32 ft0lbf)
Rear wheel nut:
45 Nm (4.5 m0kgf, 32 ft0lbf)
8-37