Sharp CD-G14000 Operation Manual page 26

CD-G14000
Listening to a CD or MP3/WMA disc (continued)
CD-G17000
CD-G22000
ENGLISH
Playback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.
After the last track on the fifth disc is played, the unit will stop
automatically.
When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
To exchange other discs whilst playing a disc:
Press one of the
seconds, press the
To remove the discs:
In the stop mode, press the
press the button.
Caution:
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon, etc.) as it
may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the power is
restored.
If the disc tray is stopped with force,"ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will be
skipped or not play.
E-22
1 - 5 buttons for the stopped disc and within 5
button and exchange discs.
1 - 5 buttons and within 5 seconds,
Various disc function
Function Main unit
Play
Stop
Pause
Track up/
Track down
PRESET PRESET
Fast
forward/
Fast
reverse
PRESET PRESET
Remote Operation
control
Press in the
mode.
Press in the playback
mode.
Press in the playback
mode. Press the
button to resume
playback from
paused point.
Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the / button
to start the desired
track.
Press and hold down
in the playback mode.
Release the button to
resume playback.
stop
/
the