Sharp CD-BA250H Quick Manual page 4

Listening to a cassette tape (TAPE 1 or TAPE 2)
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal sup-
ply voltage due to lightning, etc.) or if it is operated incorrectly, it
may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
2. If the unit is not restored in step 1, unplug and plug in
the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the follow-
ing:
¡ Press the ON/STAND-BY button to enter the power
stand-by mode.
™ Whilst pressing down the 0 / R button and the X-BASS/
DEMO button, press the ON/STAND-BY button until
"CLEAR AL" appears.
Maintenance
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
After long use, the deck's heads and capstans may be-
come magnetised, causing poor sound. Demagenetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser. Read the
demagnetiser's instructions carefully before use.
Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
Web-site: www.sharp.co.uk/support
1
2
3
4
TAPE 1 TAPE 2
Help Line: 08705 274277 (office hours)
Open the cassette door by pushing the
area marked "7 7 7 7 7 PUSH EJECT".
Load a cassette into the TAPE 1 or TAPE
2 cassette compartment with the side to
be played facing toward you.
Press the TAPE (1 V
the cassette you want to listen to.
Press the 0 / R
TAPE 1
TAPE 2
– 4 –
V V 2) button to select
V V
0 / R button to start playback.
0 / R 0 / R
0 / R
A Playback head
B Capstan
C Pinch roller
D Erase head
E Recording/Playback head
B
C
A
C
E B
D