Basic Tv Operation; Auto Program; Memorizing Channels - LG Color Television Owner's Manual

Basic TV operation

Before operating your TV, make sure the following
instructions have been completed.
• Your TV has been connected to an antenna or a
cable system.
• Your TV has been plugged in a power outlet.
• In this manual, the OSD (On Screen Display)
may be different from your TV's because it is just
an example to help you with the TV operation.
Turning on/off the TV
Press the POWER (or ON/OFF) button on the set.
At this time, the set switches to standby mode and
the standby indicator lights up in red.
To switch the TV on from standby mode, press
the TV/VIDEO, CH /
D
E
POWER, TV/VIDEO, CH
on the remote control.
A channel number will be displayed on the screen.
The on-screen display will disappear after a few
seconds.
Press the POWER button on the remote control. It
reverts to standby mode.
To switch the TV off, press the POWER button on
the set.
Selecting the on screen language
CH. CH.
Language
Input
Key+lock
Caption+
Auto+demo
+ {
Move Next Exit
+ + +
1. Press the MENU button and then
until the menu is displayed as shown right.
2. Press the and then
G
.
Language
3. Press the and then use
G
select the desired language.
From this point on, the on-screen display will be
presented in the language of your choice.
4. Repeatedly press the MENU button to exit.

Memorizing Channels

This is the function to memorize all the active
channels in your area before you can use the TV.
There are two ways of memorizing channels. You
can use either.
One is called AUTO PROGRAM and the other is
called MANUAL PROGRAM.
In AUTO PROGRAM the TV will memorize the
channels in ascending order.If there are additional
channels you want to add or delete, you can
manually add or delete those channels.
button on the set or
/ or number button
D
E
{
{
{
{
{
}
/ button
D
E
/ button to select
D
E
/ button to
D
E
6
Memorizing the Channels by

AUTO PROGRAM

AUTO PROGRAM searches and memorizes all
the active channels in your area then you can
select the desired channel with the
Using the A.PROG button
You can conveniently perform AUTO PROGRAM
using the AUTOPRG. button on the remote
control.
1. Press the AUTOPRG. button.
2. Press the or AUTOPRG. button.
G
The AUTO PROGRAM starts now.
If you want to stop auto programming, press the
ENTER ( ) button.
A
Only the channels searched up to that time are
memorized.
Notes :
• If the programmed signal has poor
quality, memorize again in the
• AUTO PROGRAM stores all receivable channels
regardless of receiving signal (RF, Cable).
• If channels of general wireless TV and cable TV
are duplicated, press the number buttons (0 ~ 9)
to change as .
Channels of general
wireless TV
Using the MENU button
CH. CH.
Auto+prog.
Manual
Favorite++
Move+ Next { Exit}
+
+ +
1. Press the MENU button and then
the until the menu is displayed as shown right.
2. Press the and then
G
.
Auto prog.
3. Press the button to enter the
G
mode.
4. The AUTO PROGRAM starts now.
/ buttons.
D
E
Auto prog. .
Channels of
Cable TV
{
{
{
/ button
D
E
/ button to select
D
E
Auto prog.