Picture Control; Enjoying The Eye Function (Some Models); Auto Picture Control; Adjusting The Picture - LG Color Television Owner's Manual

Picture control

Enjoying the Eye Function (some models)

The set will automatically adjust the picture according to the
surrounding conditions with the display
1. Press the EYE button on the remote control.
The display
2. Press the EYE button again to switch the Eye function off.

Auto Picture Control

You can select picture modes programmed at factory as you prefer.
Using the APC button
1. Press the APC button.
2. Press the APC button to select
or
,
3. Press the ENTER( ) button to exit.
A
Using the MENU button
1. Press the MENU button and then
displayed as shown right.
G
2. Press the and then D
3. Press the G button to enter the
4. Press the D / button to select
E
, ,
5. Repeatedly press the MENU button to exit.

Adjusting the Picture

This is the function to manually adjust the desired picture levels
(
, ,
you like. If the picture you set is not satisfactory, you can select a
factory preset picture. In the broadcasting system PAL-M/N, the
picture item is not displayed.
1. Press the MENU button and then
displayed as shown right.
G
2. Press the and then
mode.
3. Press the G button.
F G
4. Press the / button to adjust the level.
The level of displayed is adjusted.
5. Repeatedly press the MENU button to exit.
.
appears and the picture is adjusted.
(some models),
.
D / button the until the menu is
E
/ button to select .
E
mode.
or .
) of the screen as
, ,
D / button the until the menu is
E
D / E button to select the desired picture
14
,
CH.
(some models),
CH.
CH.