Reformatting A Disc Manually - Toshiba D-VR18DTKB Owner's Manual

E9NG1BD_EN.book Page 37 Monday, April 7, 2008 5:54 PM
4
If you want to set "Auto Chapter" off,
select "OFF" using [U / D], then
press [ENTER / OK].
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
If you want to change the time period
for "Auto Chapter", select the
required time period using [U / D],
then press [ENTER / OK].
5
Press [SETUP] to exit.
Note
• The interval for auto chapter may be up to 2 minutes
different from the time option you set.
• A blank chapter may be created depending on the
remaining time of the disc.
• While recording, no more chapter marks will be
added when the maximum chapter mark number is
reached.

Reformatting a Disc Manually

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
If you are using a DVD-RW/+RW disc, you can format
the disc by performing "Format". You can format
DVD-RW disc for either Video mode recording or VR
mode recording. DVD+RW disc can be formatted in
order to erase all content of the disc.
Note
• When you reformat the disc, the contents of the disc
are erased.
• Make sure that the recording format is set to the
desired mode. (See the steps 1 to 6 in "Choosing
the Recording Format of a Blank DVD-RW Disc" on
page 35.)
Insert a recordable disc.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [U / D],
then press [ENTER / OK].
3
Select "Format" using [U / D], then
press [ENTER / OK].
4
Select "Start" using [U / D], then
press [ENTER / OK].
For DVD+RW, use
press [ENTER / OK].
A pop up window will appear and prompt you to
confirm.
DVD+RW DVD+RW
to select "Yes", then
[U / D]
5
Select "Yes" using [U / D], then
press [ENTER / OK].
e.g.) VR mode DVD-RW disc
Are you sure?
Yes
No
Formatting will start.
If you want to cancel formatting, select "No".
6
Formatting is complete.
Note
• It is not possible to use a disc formatted with this unit
in other DVD recorder. When you use a disc with
another DVD recorder, format a disc using that DVD
recorder.
37
EN