Manual Geometry Alignment - Mitsubishi Electric WD-60C10 Service Manual

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-65638 / WD-73638 /
WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838

Manual Geometry Alignment

V43C & V43
1. Entering the Manual Geometry Alignment Mode
1. Activate the Service Menu <MENU><2-4-7-0>.
2. Select "Calibration" <ENTER>. A "dot pattern" will be displayed.
. Enter the Manual Geometry Alignment mode by pressing <1-3-9-7>. The Manual Geometry Alignment Pattern
will appear. See 2. Manual Geometry Alignment procedure on next page.
Manual Geometry Alignment
V43+ & V43++
1. Entering the Manual Geometry Alignment Mode
1. Activate the Service Mode <MENU><2-4-5-7>.
2. From the Service Menu, press the <0> button. The Data Transfer & Geometry Menu will appear.
Data Transfer & Geometry Menu <MENU><2-4-5-7><0>
RESTORE ENGINE DATA FROM BACKUP
RESTORE GEOMETRY DATA FROM BACKUP
MANUAL GEOMETRY ALIGNMENT
RESTORE INDEX DELAY
SAVE ENGINE AND GEOMETRY SETTING TO BACKUP
Warning - Only use "SAVE ENGINE AND GEOMETRY SETTING TO BACKUP"
3. Use the <
Alignment Pattern will appear. See 2. Manual Geometry Alignment procedure on next page.
V43C & V43 Option / Service Menu
<MENU><2-4-7-0>
Service Menu
1. Information
2. Reset All Settings
3. Calibration
4. Test Pictures
after Optical Engine replacement.
> buttons to select "MANUAL GEOMETRY ALIGNMENT" <ENTER>. The Manual Geometry
Page 36