Using Basic Functions - Sony FD Trinitron WEGA KV-24FS120 Operating Instructions Manual

Using Basic Functions
Setting Up the TV
After you have finished connecting your TV, you can use Auto Program to set up your
channels. During Auto Program, the TV will automatically search for available channels and
program receivable channels.
when you StartAuto Programwait uniil itis finished; Otherwiseit WillSkipOverchannelsthat are
available.PerformAuto Programagain to program receivablechannels.
_ER
1
Press _ to turn on the TV. The Initial Setup screen appears.
CH
2 Press _ on the remote control or on the TV front panel to start Auto Program, or press
CH
(_ to exit.
_J The Initial setup screenappeais eachtime you tUrn OntheTV until you perform Auto programl
To perform Auto Program again
1
2
3
4
5
6
To reset the TV to factory settings
Press _.
Press _ to highlight Channel Menu.
Press _" to highlight Cable. Press {_ to select.
Press _ or _" to highlight On or Off according to how you connected your TV. Press _ to
select.
Press _" to highlight Auto Program. Press {_ to search for channels.
After Auto Program finishes, press _ to exit.
1
Turn the TV on.
RESET
2
Hold down cD on the remote control.
3 Press and release the POWER button on the TV front panel. The TV will turn itself off,
then back on.
RESET
4 Release cD.
15