Table of Contents
Advertisement
MAIN MENU
Manual Search
When you perform a Manual Search you first need to enter some
parameters for the channel search to work.
The information you need to enter in this menu is available in
magazines covering satellite TV reception, on the Internet or from
your Service Provider.
Transponder frequency: Specify the frequency in GHz. If you
enter the wrong figure(s), erase with the
Polarization: Select Horizontal, Vertical, Circular left or Circular
right.
Symbol rate (MSym/s): Enter with the numeric buttons. If you
enter the wrong figure(s), erase with the
FEC: Select "Auto" or any of the preprogrammed values.
Network Search: Select "Yes" if you want to search on all trans-
ponders connected to a specific network.
Press OK to start searching for channels.
TV Settings
From here you can adjust settings concerning your TV.
TV screen format
Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for a wide screen TV.
RF channel
Select this alternative if you have to change the RF channel.
If you change the RF channel number, you must also change it
to the same value on the TV. If you do not, the picture will become
black.
TV Standard
The TV standard is NTSC.
Time Adjustment
The time is adjusted by using the
time.
You can also adjust the minutes by using the
button.
button.
buttons, 1/2 an hour at a
buttons.
GB 23
Advertisement
Table of Contents
