Page 1
CD RECEIVER KD-R606/KD-R605 KD-R606/KD-R605 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0577-001A [U/UH]...
Page 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
CONTENTS Detaching the control panel Detaching the control panel ......3 Attaching the control panel ......3 How to reset your unit ......... 3 How to forcibly eject a disc ......3 OPERATIONS Basic operations ........... 4 • Using the control panel ....... •...
Basic operations Using the control panel Change the display information. • FM/AM: Select preset station. • Return to the previous menu. • CD/USB/CD-CH: Select folder. • USB-IPOD: Switch the setting between “HEAD • IPOD: Enter the main menu/Pause playback/ MODE” and “IPOD MODE” * [Hold].
Display window Bluetooth indicator Menu hierarchy position indicator— (bottom), Tr (track) indicator (top), (middle) Source display / Disc number / Track number / Status of Bluetooth device Folder number / Time countdown indicator / (Device number, [ : 1 – 5]; signal strength, Setting and list operation information : 0 –...
Page 6
• Searches for stations if pressed briefly. • Fast-forwards or reverses the track if pressed and held. • Changes the tracks if pressed briefly. • While listening to an iPod (in menu selecting mode): Connected with the interface adapter: – Selects an item if pressed briefly. (Then, press ∞...
Preparation Canceling the display demonstration and setting the clock • See also page 23. Turn on the power. Cancel the display demonstrations Select “DEMO,” then “DEMO OFF.” Press and hold until the Set the clock main menu is called up. “CLOCK SET.”...
Listening to the radio Select “FM” or “AM.” Search for a station to listen—Auto Search. When a station is tuned in, searching stops. To stop searching, press the same button again. • You can also search for a station manually—Manual Search. Hold either one of the buttons until “M”...
Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” Selecting preset station Select preset number “04.” [Turn] [Press] Disc/USB operations Playing a disc Turn on the power.
Playing a file on a USB device This unit can play MP3/WMA files stored on a USB mass storage class device. You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. to the unit.
Disc/file operations Selecting a track/folder Selecting the playback modes You can use only one of the following playback modes at a time. [Turn] [Press] [Turn] [Press] • For MP3/WMA discs, select the desired folder, Ô REPEAT RANDOM then the desired track by repeating the control dial procedures.
Using the Bluetooth ® devices For Bluetooth operations, it is required to connect the Registering using “OPEN” Bluetooth adapter (KS-BTA200) (not supplied) to the Preparation: Operate the device to turn on its CD changer jack on the rear of this unit. Bluetooth function.
Page 13
Use the Bluetooth device to search and For available devices... connect. Enter the specific PIN code of the device to the On the device to be connected, enter the same unit. PIN code you have just entered for this unit. Refer to the instructions supplied with the “CONNECTED”...
MISSED*). If the cellular phone is compatible with text message Then select a name (if it is acquired) or phone (notified through JVC Bluetooth adapter) and number. “MSG INFO” (message info) is set to “AUTOMATIC” (see page 22), the unit rings to inform you of the message arrival.
• Using “VOICE DIAL” may be difficult in a noisy environment or during an emergency. Bluetooth Information: If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only) EXTERNAL DEVICES...
Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer (not supplied) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
Listening to the iPod/iPhone You can connect the iPod/iPhone using the following cable or adapter: Cable/adapter To operate USB 2.0 cable (supplied with the iPod/iPhone) to the See “When connected with the USB cable” below. USB input jack on the control panel Interface adapter for iPod, KS-PD100 (not supplied) to See “When connected with the interface adapter”...
Pressing (or holding) the following buttons allows you to... [Turn] [Press] [Press] Pause/resume playback. ONE RPT : Functions the same as “Repeat One” of the iPod. [Press] Select track ALL RPT : Functions the same as “Repeat [Hold] Reverse/fast-forward track All”...
Pressing (or holding) the following buttons allows you Selecting the playback modes to... See page 18 for operations. Pause/resume playback • “ALBUM RND” functions only if you select “ALL” for “ALBUMS” in the main menu. [Press] Select track [Hold] Reverse/fast-forward track Listening to the other external components You can connect an external component to: •...
Selecting a preset sound mode You can select a preset sound mode suitable to the music genre. • See also page 23. Selecting from Menu. [Turn] [Press] • See the following for “USER” settings. Storing your own sound mode Adjust the sound elements of the selected tone.
Repeat steps 3 and 4 to adjust other sound characteristics. The adjustment made will be stored automatically. Preset value setting for each sound mode Preset value Sound BASS MIDDLE TREBLE LOUD mode (loudness) Freq. Level Freq. Level Freq. Level USER 60 Hz 00 Q1.25 1.0 kHz Q1.0 10.0 kHz...
The unit does not inform you of the connected and it is compatible with text message arrival of a message. (notified through JVC Bluetooth adapter). Bluetooth Audio: Shows only “Version.” MIC SETTING (microphone setting) Only for the device being connected for “BT-PHONE.”...
Menu operations Repeat step 2 if necessary. Call up the menu. Select the desired item. • To return to the previous menu, press BACK. [Turn] [Press] • To exit from the menu, press DISP or MENU. Initial: Underlined Category Menu items Selectable settings, [reference page] DEMO •...
Page 24
Category Menu items Selectable settings, [reference page] MONO * • MONO ON : Activate monaural mode to improve FM reception, but Monaural mode stereo effect will be lost, [8]. • MONO OFF : Restore the stereo effect. IF BAND • AUTO : Increases the tuner selectivity to reduce interference Intermediate noises between adjacent stations.
Page 25
• AM OFF : Disable “AM” in source selection. EXT IN * • CH/IPOD : To use a JVC CD changer, [16], or an Apple iPod/iPhone, External input [17]. • EXT INPUT : To listen to a portable audio player (connected to the CD changer jack), [19].
Category Menu items Selectable settings, [reference page] AUDIOBOOKS * • NORMAL : You can select the playback speed of the “Audiobook” Speed control of • FASTER sound file in your iPod. “Audiobooks” • SLOWER • Initial selected item depends on your iPod setting. IPOD SWITCH * •...
Repeat steps 4 and 5 to adjust other primary Exit from the setting. colors. Select “USER” to show your own colors for the buttons and display. More about this unit Basic operations Tuner operations Turning on the power Storing stations in memory •...
Page 28
Playing a CD-R or CD-RW • This unit can play back MP3/WMA files meeting the conditions below: • Use only “finalized” CD-Rs or CD-RWs. – Bit rate of MP3/WMA: 32 kbps — 320 kbps • This unit can only play back files of the same type as –...
Playing MP3/WMA tracks from a USB device • This unit may not play back files in a USB device properly when using a USB extension cord. • While playing from a USB device, the playback order • This unit cannot play back the following files: may differ from other players.
Page 30
It is not possible to browse video files on the “Videos” menu. “IPOD MODE” is available (see page 17). JVC bears no responsibility for any loss of data • If the iPod does not play correctly, please update your in an iPod/iPhone and/or USB mass storage iPod software to the latest version.
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. •...
Page 32
Symptoms Remedies/Causes • A longer readout time is required Do not use too many hierarchical levels and folders. (“READING” keeps flashing on the display). • Tracks do not play back in the order you The playback order is determined when the files are have intended them to play.
Page 33
Symptoms Remedies/Causes • Bluetooth device does not detect the The unit can be connected with one Bluetooth cellular unit. phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device. Disconnect currently connected device and search again.
Page 34
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective owners.
Maintenance How to clean the connectors To keep discs clean Frequent detachment will deteriorate the connectors. A dirty disc may not play correctly. To minimize this possibility, periodically wipe the If a disc does become dirty, wipe it with connectors with a cotton swab or cloth moistened with a soft cloth in a straight line from center alcohol, being careful not to damage the connectors.
Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω...
Page 37
CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
ENGLISH ‰∑¬ ELECTRICAL CONNECTIONS °“√‡™◊ Ë Õ ¡‚¥¬„™È ‰øøÈ “ PRECAUTIONS on power supply and speaker connections: ¢È Õ §«√√–«— ß ”À√— ∫ °“√µË Õ ·À≈Ë ß ®Ë “ ¬°”≈— ß ·≈–≈”‚æß • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit •...
Page 42
°Ë Õ π®–‡™◊ Ë Õ ¡µË Õ °— ∫ Õÿ ª °√≥Ï ¿ “¬πÕ° °√ÿ ≥ “µ√«® Õ∫„ÀÈ · πË „ ®«Ë “ ªî ¥ ‡§√◊ Ë Õ ßÕ¬Ÿ Ë You can connect the following JVC components to the CD changer jack.