Table of Contents
Advertisement
Navi Bars
Search folder
When you want to search for channels at a later time.
A channel search procedure can be performed in different ways:
Automatic, Manual or Advanced manual search.
Automatic search
Highlight the line and press ok to start searching for channels
Manual search
Frequency: Enter the frequency with the numeric buttons on the
remote control.
Network search: Select "Yes" if you want to search on all of the
transmitters connected to a specific network.
Symbol rate: Enter the symbol rate.
Constellation: Select the appropriate QAM value with the left/
right arrow buttons.
Press ok to start searching for channels.
Advanced manual search
You can use this menu if you are looking for some "specific"
channels (i.e., non-DVB standard channels) that are easier to find
once you have entered the necessary PID settings here.
Frequency: Enter the frequency with the numeric buttons on the
remote control.
Network search: Select "Yes" if you want to search on all of the
transmitters connected to a specific network.
Symbol rate: Enter the symbol rate.
Constellation: Select the appropriate QAM value with the left/
right arrow buttons.
PID Video: Enter the PID (Packet Identifier) for the video signal.
PID Audio: Enter the PID for the audio signal.
PID PCR: Enter the PID for the PCR (Programme Clock Reference).
• Press ok to tune with the specified values.
Channels created with an advanced manual search will get an
automatically generated name, e.g., P0001 for the first channel,
P0002 for the second, etc.
Press ok to save the new channel or back if you do not want to save
them.
GB 19
Advertisement
Table of Contents
