Diseqc Motor Setting; Boot Channel; Company Setting; Acoustic Signal For The Orientation Of The Satellite Antenna - Silvercrest SL 65 Operating Manual

DiSEqC motor setting

(via "Menu" key, System configuration)
Select the menu item, "DiSEqC motor setting" in the menu
"System configuration" for doing DiSEqC motor settings.
You can carry out changes only if you have connected the
receiver to a motorized satellite system.

Boot channel

(via "Menu" key, System configuration)
Here, you can define the channel displayed when booting the
device after a power failure.

Company Setting

All your settings and stored data are deleted. The receiver
is reset to original settings.
Select the menu item, "Company setting" in the "system
configuration" sub-menu to reset the receiver to company
settings.
Select an option and respond to the warning message.
Wait until the receiver has rebooted.
This process may take some minutes.
Acoustic signal for the orientation of the satellite
antenna
(Via "Menu" key, Other, Signal display). Simultaneously, optical
signal strength is displayed.
An acoustic signal is transmitted via the TV set. A stronger and
higher signal indicates a better orientation of the antenna.
40