Registering The Handset - Siemens Gigaset 3000 Classic Operating Instructions Manual

Registering the handset

You must register your handset at the base station before
you can start to make calls.
Step 1
• First prepare the Siemens base station for registration:
Gigaset
3010/pocket
3015
3020, 3025
3030, 3035
ISDN
models
1000/2000
models
Step 2
• You now have one minute to enter the following at the
handset:
System PIN
e.g.
– Please refer to the relevant operating instructions (step 1)
to register at non-Siemens base stations.
– You can register your Gigaset 3000 Classic handset at
up to 4 different base stations, see above.
Base station preparation
Hold down the coloured base station key for
approx. 10 seconds until you hear signal
tones.
In the base station menu select registration
option and confirm.
Press the display (LED) –
flashing during registration.
As for relevant successor model.
Press the keys shown.
Enter the base station number, e.g.
tion 1-4) and confirm.
Enter the base station's system PIN and con-
firm (factory setting: 0000) – the unassigned
call numbers appear after a few seconds.
Enter the desired call number – the statio-
nary base icon
Your handset is ready for operation!
is displayed.
(sta-
9