SDM-090(P)
Digital Multiplexer
5. Remote Control by connecting to PC
A. Connecting to RS-232C
The unit can be remote-controlled by connecting to PC in which terminal
emulation program is built. At this time, RS-232C Cable is used for connection.
When connecting to the PC by RS-232C, some keys on the PC keyboard can be
used as Function Buttons on the Unit's Front Panel.
RS-232C Terminal(D-SUB 9PIN)
5
9
6
RS-232C 9PIN(Connector Allocation)
PIN NUMBER
PIN SPECIFICATIONS
2
TXD(TRANSMITTEDDATA)
3
RXD(RECEIVEDDATA)
5
SG(SIGNALGROUND)
1, 4, 6~ 9
NOCONNECTION
1
3-5