Turning The Subwoofer On/Off; Aux In; Settings; Menu Level - Silvercrest CRB-531 Instructions Manual

15.15 Turning the subwoofer on/off

The device has a subwoofer output on its rear side. To activate this connection, press the "BAND" button for more than two
seconds. The sign .will appear on the display.
To deactivate the output again, press the "BAND" button again for more than two seconds.

16 AUX IN

The AUX IN is a connection with which you can connect external audio devices through their headphone or AUX output with
this device. The audio tracks played back on these devices are then put out through the car speakers. This is how you can e.g.
®
play back audio files that you have saved on your mobile phone, minidisk, iPod or tape recorder.
To connect external audio devices with the Bluetooth car radio CRB 530, you will need a cable with a 2.5 mm jack plug on a 3.5
mm jack plug, which is contained in the scope of the delivery. Connect this cable to the headphone connection or AUX output of
your playback device and begin the playback. Set the volume of the playback device to a medium level and subsequently
regulate the volume with your Silvercrest CRB-531. If the playback source of the Silvercrest CRB-531 has not been set to AUX
yet, please press the "MODE" button until AUX appears on the display.

17 Settings

17.1 Menu level 1

By briefly pressing the volume control dial once or several times, the functions of menu level 1, volume control, bass setting,
treble setting, and the speaker balance between the left and right as well as front and rear speaker groups can be selected and
set.
Changing the bass setting (BASS)
Pressing the control dial twice will result in reaching the bass settings. The message "BAS" will appear on the display together
with the current level (e.g. "+2"). To change the bass bandwidth, turn the control dial clockwise or counter-clockwise. The
bandwidth can be set in a range between "-7" and "+7". It can be changed in increments of one.
The setting is saved either when the desired value is confirmed by pressing the control dial or through automatic storage
(don't change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial , you
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
34